The Complete Course of Aspen HYSYS 2024

Learn Aspen HYSYS in a Professional way. Become an expert in Process Modeling, Chemical Engineering...

Ratings: 4.01 / 5.00




Description

Become an Aspen HYSYS professional and learn one of employer's most requested skills nowadays!

This comprehensive course is designed so that students, engineers, chemists, researchers... can use Aspen HYSYS software from scratch to use it in a practical and professional way. Never mind if you have no experience in the software, you will be equally capable of understanding everything and you will finish the course with total mastery of the subject.

After several years working as an Engineer, I have realized that nowadays mastering Aspen HYSYS for simulating and modeling chemical and industrial processes is very necessary in engineering or other industrial applications. Aspen HYSYS is one of the software leaders in the industry and its demand is increasing. Knowing how to use this software can give you many job opportunities and many economic benefits, especially in the world of engineering.

The big problem has always been the complexity to perfectly understand the software it requires, since its absolute mastery is not easy. In this course I try to facilitate this entire learning and improvement process, so that you will be able to carry out and understand your own projects in a short time, thanks to the step-by-step and detailed examples of every concept.

With 8 exclusive hours of video and 20 real hands-on projects, this comprehensive course leaves no stone unturned! It includes both practical exercises and theoretical examples to master Aspen HYSYS. The course will teach you the process simulation of chemical and industrial projects in a practical way, from scratch, and step by step.

We will start with the HYSYS introduction and the software setup and familiarization on your computer. Then, we'll cover a wide variety of topics, through the 20 complete practical projects:

  1. Build a Propane Refrigeration Loop

    • Define the Properties Environment

    • Add Material Streams and Unit Operations

    • Customize the HYSYS Workbook

    • Manipulate the Flowsheet

    • Create and Save a Template

  2. Model a Refrigerated Gas Plant

    • Build the Base Case

    • Add a Balance Operation

    • Configure an Adjust Operation

    • Install a Template

  3. Perform Oil Characterization and HP Separation

    • Specify the Assay Information

    • Attach the Assay

    • Build the Flowsheet

    • Add a Spreadsheet Operation

    • Run a Case Study

  4. Model Two-Stage Compression Process

    • Build the Flowsheet

    • Install Recycles

    • Add the Compressor Curves

  5. Rate a Heat Exchanger

    • Review Weighted Model

    • Apply a Rating Model

    • Integrate EDR Calculations

  6. Troubleshoot Simulations

    • Troubleshoot a Refrigerated Gas Plant

    • Troubleshoot a Two-Stage Compression Skid

    • Troubleshoot a Gas-Oil Separation Train

    • Troubleshoot an NGL Fractionation Train

    • Troubleshoot a Vacuum Distillation Tower

  7. Build a Gas Gathering System

    • Add the First Branch

    • Complete the Piping Network

    • Perform Flow Assurance Studies

  8. Construct a Pre-Heat Train Model

    • Build the Pre-Heat Train

    • Add a Pipe Segment

    • Install the Balance and Adjust

  9. Model NGL Fractionation Process

    • Define and Run the Demethanizer Column

    • Define and Run the Deethanizer Column

  10. Define and Analyze an Atmospheric Crude Column

    • Add the Column Template

    • Introduce Side Operations

    • Adjust Column Operating Conditions

    • Product Stream Analysis and Cut Point Specs

  11. Model a TEG-based Gas Dehydration Process

    • Define the Feed Streams

    • Saturate the Dry Gas Feed

    • Add the TEG Contactor

    • Add TEG Regenerator and Makeup Operation

    • Perform Water Dew Point Calculation

  12. Define and Analyze Vacuum Tower with Heat Integration

    • Add the Vacuum Tower

    • Introduce Side Operations

    • Export Pump Around Streams

    • Material Stream Heat Integration

    • Energy Stream Heat Integration

  13. Model an Acid Gas Cleaning Process

    • Define the Fluid Package

    • Build the Amine Contactor

    • Add the Regenerator and Makeup

    • Complete the Flowsheet and Review Results

  14. Build a Multi-Flowsheet Liquefied Natural Gas (LNG) Plant Model

    • Define the Properties Environment

    • Acid Gas Removal and Dehydration

    • Pre-Cooling Train

    • Convert Natural Gas to LNG

    • Compressor Train Section

    • Refrigerant Temperature Control

  15. Turbo Expander and NGL Fractionation Plant Model

    • Configure the Turbo Expander

    • Adding the Fractionation Columns

    • Sales Gas Compression

    • Customizing Stream Properties

  16. Advanced Columns

    • Simulate a Condenser Externally

    • Modify the Column Sub-Flowsheet Reboiler

    • Tune Stage Efficiency

    • Perform Column Internals Sizing and Rating

  17. Real Separators

    • Specifying Carryover Effects

    • Using Carryover Correlations

    • Adding a Secondary Separation Device

  18. Reactors

    • Isolate the Natural Gas Feed

    • Set up Reactions and Reaction Sets

    • Build the Synthesis Gas Process

  19. Acid Gas Cleaning

    • Review the gas-liquid acid gas treating process using MDEA and add MEAmine

    • Run a Case Study to determine the effect of adding MEA

  20. Sulfur Recovery Unit

    • Configure Sulfur Recovery Property Package

    • Configure the Thermal Stage

    • Configure the Catalytic Stages

    • Configure the 2nd and 3rd Catalytic Stages

    • Review the Performance and Optimize the Furnace Air Flow

In other words, what I want is to contribute my grain of sand and teach you all those things that I would have liked to know in my beginnings and that nobody explained to me. In this way, you can learn to solve a wide variety of projects quickly and make versatile and complete use of Aspen HYSYS. And if that were not enough, you will get lifetime access to any class and I will be at your disposal to answer all the questions you want in the shortest possible time.

Learning Aspen HYSYS has never been easier. What are you waiting to join?

What You Will Learn!

  • At the end of the course you will fully master Aspen HYSYS, to be able to conduct out your own industrial or chemical process modeling projects from scratch
  • You will become familiar with its interface, toolbars and basic commands, and you will master all the phases of the design, layout and configuration process
  • You will be able to design step by step a simulation, setting up the required inputs and understanding all the logic and ending with advanced practical examples
  • You will learn the different Methods for Physical Properties Modeling, and above all, understanding their interpretation
  • You will learn in a professional way how to troubleshoot simulations, troubleshooting the most tyipcal errors for different types of simulations
  • You will understand the fundamental concepts to be able to generate reports and analyse the results in a professional way
  • You will master all the steps of the process simulation, using all options and tools of HYSYS
  • You will be able to practice the content learned in a practical way by following all the steps in the wide variety of complete exercises (20 different projects)
  • You will start with the basics and progressively carry out more complex steps until you reach an advanced level and absolute mastery at the end of the course

Who Should Attend!

  • Beginners who have never used Aspen HYSYS before
  • Chemical, industrial, process or operation Engineers who want to learn a new engineering software for process simulations
  • Intermediate or advanced Aspen HYSYS students who want to improve their skills even more!