AWS Certified Welding Inspector, Part-2 -SAW/GMAW/FCAW/EGW

Description

The CWI exam consists of three parts

Part A – Fundamentals

Part B – Practical,

Part C – Code Book Applications.

Part A is a closed-book exam that consists of 150 questions on the welding fundamentals, terms and definitions, welding processes, nondestructive examination, procedures, symbols, calculations, safety practices, and duties and responsibilities of a CWI.

Part B is a practical hands-on test to find the ability to visually identify welding discontinuities and to determine the acceptance or rejection of a weld.

Part C is an open book test of Code application to evaluate the applicant’s familiarity and ability with a selected code application.

The pass marks for Part- A, B & C is 72%

You can refer to the full details of AWS Certification and Qualification Standards in the following documents available at free of cost on the AWS website:

QC1:2016-AMD1 - Specification for AWS Certification of Welding Inspectors

B5.1:2013-AMD1 - Specification for the Qualification of Welding Inspectors

(Study the documents and be prepared well to answer any question from the document.)

In this course, the candidate will learn the following  :

Preparation of reports

Complete knowledge and understanding of the following welding processes:

SAW - PAW - RW - SMAW - SW-  FCAW-  GTAW -OFW-  ESW- GMAW.

Thermal Spraying Soldering

Mechanical Cutting Thermal Cutting/Gouging

Brazing/Braze Welding

The fundamental principles of the following ND Tests:

VT, MT, UT, PT, RT, LT

He will acquire knowledge of quality procedures and Quality audits/surveillance.

Knowledge and understanding of the fundamentals of welding metallurgy

Knowledge and understanding of all the welding symbols and engineering drawings.

Base material compliance

Filler metal compliance

Filler metal storage, handling

Inspection records compliance

Verification of proper documentation compliance

Base material and filler metal compatibility

Certification of documented results and compliance

Procedure qualification records compliance

Welding procedure compliance

NDE procedures compliance

Applicable safety requirements in the workplace as per the International Standards.

After completing the course learners can achieve the full knowledge of the following subjects:

The skills of a Certified Welding Inspector of the American Welding Society.

Submerge Arc Welding (SAW) Power Sources. Welding gun and assembly. Manual welding (single wire), Mechanical welding (single wire).

Electrode stick-out lengths, Tandem /Twin wire welding, SAW wire /electrode, Narrow grove welding, disadvantages of narrow grove welding.

Different types of fluxes. What is Active flux? SAW applications.

What is the Gas Metal Arc Welding process? GMAW metal transfer modes. Globular transfer, short circuit transfer, Spray transfer, Pulsed Spray.

Flux Core Arc Welding. GMAW process wire. GMAW wire classification as per AWS. GMAW Wire size and base metal thickness data table.

GMAW process line diagram and power supply. Variations in Gas Metal arc Process. MAG welding process.

What is Flux Core Arc Welding? FCAW power supply DCEN, DCEP. Self-shielded electrodes. Machinery and equipment. Equipment setup line diagram.

Wire feed mechanism. Power requirements and power source. What is the power source duty cycle? FCAW applications.

Classification of Flux-Cored Electrodes. Carbon steel and low alloy steel electrodes and specifications.

Performance and usability characteristics for stainless steel flux cored electrodes. Welding applications.

What You Will Learn!

• Students learn and prepare for the American Welding Society - Certified Welding Inspector Examination
• Students learn the skills of Certified Welding Inspector of American Welding society
• Students learn about Submerge Arc Welding. SAW Power Sources. Welding gun and assembly. Manual welding (single wire), Mechanical welding (single wire),
• Students learn about electrode stickout lengths, Tandem /Twin wire welding, SAW wire /electrode, Narrow grove welding, Dis advantages of narrow grove welding.
• Students learn about different types of fluxes. What is Active flux? SAW applications.
• Students learn about What is Gas Metal Arc Welding process? GMAW metal transfer modes. Globular transfer, short circuit transfer, Spray transfer, Pulsed Spray
• Students learn about Flux Core Arc Welding. GMAW process wire. GMAW wire classification as per AWS. GMAW Wire size and base metal thickness table.
• Students learn about GMAW process line diagram and power supply. Variations in Gas Metal arc Process. MAG welding process.
• Students learn about what is Flux Core Arc Welding. FCAW power supply DCEN, DCEP. Self shielded electrodes. Machinery and equipment. Equipment setup line diagra
• Students learn about wire feed mechanism. Power requirements and power source. What is power source duty cycle? FCAW applications
• Students learn about classification of Flux-Cored Electrodes. Carbon steel and low alloy steel electrodes and specifications.
• Students learn about performance and usability characteristics for stainless steel flux cored electrodes. Welding applications.

Who Should Attend!

• Degree or Diploma or Trade Certificate in Mechanical or Welding Engineering, with 2 to 3 years of Industrial experience in Welding or Engineering. Teaching experience will also be considered.

TAKE THIS COURSE