Design the High Rise Buildings ( Level 2 )

Structural Engineering Software ( ETABS&SAFE ), from point of view of skyscrapers design engineer .

Ratings: 4.32 / 5.00




Description

In This level you will learn how to revise your model and checking a lot of effected factors in structural design .Those factors will be mentioned below :

Part 1 ( ETABS Model )

  1. Check Load Combinations .

  2. Check Static Seismic Forces AS Per UBC97.

  3. Check Dynamic Seismic Forces AS Per UBC97.

  4. Check P-Delta Analysis

  5. Check the Mass Source.

  6. Check The Time Period.

  7. Check The Mode Shapes.

  8. Check The Wind Tunnel .

  9. Check The Base Shear As Per UBC97

  10. Check Displacement Per Wind As Per ASCE7-16

  11. Check The Overturning Moment.

  12. Check Seismic Drift As Per UBC97

  13. Design All Members Using ACI318M-14

Part 2 ( SAFE Model )

  1. Check The Materials, Slabs thickness, Rebars and loads

  2. Check Load Combinations As Per ACI318M-14

  3. Draw the strips for designing .

  4. Check Automatic Mesh.

  5. Check the Stiff Areas.

  6. Check The Deflection As Per ACI318M-14

  7. Design The Slab AS Per ACI318M-14

  8. Check The Punching AS Per ACI318M-14

At the end you will have the required information to start designing your first tower or skyscraper building with the acceptable values from designed codes.

What You Will Learn!

  • In this course the engineers will learn how to use the technical software with required codes to achieve the optimal and safer design to the high rise buildings .
  • To be structural designer
  • This course is a continuation of Design The High Rise Buildings Series ( Level 1 ,2 and 3 )

Who Should Attend!

  • The course for the structural engineers who are aiming to be a designers.
  • Beginner & Experienced