Electrical Design - Building Services

Electricity in Buildings, Design Calculation, Sizing, Selection and Distribution.

Ratings: 3.92 / 5.00




Description

The Course enables the entry level and working engineers to understand the basics, different systems used in Electrical for Domestic and commercial purposes.

To achieve the optimal design, one should needs good analytical skills and up-to-date technical knowledge of various system designs. This training is useful to design Electrical Building Services. This training is an opportunity to apply the academics and develop an understanding of how to develop solution-driven concepts and translate them into a complete set of plans and prototypes.

Electrical Required in Commercial Buildings, Airports, Shopping malls, Petrochemical complex, refineries, pharmaceutical industry, Aerospace industry, Hospitals etc..,

Electrical designing is a branch of electrical engineering which enables Electrical engineer to size electrical equipment’s used in building services. Electrical design involve, estimation of load, sizing, planning and testing wrt Codes and make schematic drawings.

We will work on lighting equipment, power systems, power distribution, fire and life safety systems

To get power we require Distribution transformer, switchgear for protection, cable for transmission of power and measuring instruments for measuring variable quantities like current, voltage, fault current etc.

Can we live without Electricity? The answer is the future of this Course.


1. General


2. Codes & Standards to be followed


• Indian electricity rules

• National electrical code of India (NEC)

• National building code of India (NBC)

• Applicable standards issued by Bureau of Indian standards (BIS)

• Institute of Electrical & Electronics Engineers (IEEE)

• Regulations of local fire authorities

• Requirements stipulated by Pollution control Board for Noise & Air


3. Electrical equipment’s and its application used in the installation


• Control devices

• Measuring devices

• Circuit protection devices

• Transformers

• Diesel generators

• Capacitors

• Bus ducts, Bus-bars, Cables (HT/LT) & wires

• Motors & Pumps

• Luminaries – General & Emergency

• Isolators & socket outlets

• UPS/Inverter & Battery banks

• Earthing or Grounding

• Lightning arrestor


4. Means of electrical distribution for installation

• Panels (LT)/Switch Board/Motor control centers (MCC’s)/Final Distribution boards (DB’s)

• Cable trays, trunking or raceways, conduits & underground Pipes (Concrete/PVC)


5. Major electrical loads used in the installation

• Lighting load – Internal & external

• Utility power load

• HVAC loads like FCU’s, Fans etc

• PHE & FF loads like Water transfer pumps, Booster pumps, Fire Fighting pumps, Jockey pumps etc

• Lifts (Elevator) load

• Computer & data centre (Server) loads for office building


6. Electrical design calculations


• Load & maximum demand calculation

• Transformer sizing calculation

• DG sizing calculation

• Short circuit calculation

• Voltage drop calculation

• Capacitor sizing calculation

• Cable sizing calculation

• Earthing calculation

• Lightning calculation

• UPS/Inverter sizing calculation

• Battery sizing calculation


7. Various design stages & Sequence of electrical design procedure


Concept design stage


• Understanding the building plans, elevations & sections

• Gathering specific data from the utilities(Electricity board)

• Understanding clients specific requirements

• Preparation of basis of design which should include the cost estimate.


Schematic design stage

• Preparation of Load calculation to arrive maximum peak demand

• Sizing of all Equipments, cables, cable trays

• Electrical design calculations

• Preparation of single line schematic of electrical distribution system with metering options

• Preparation of lighting, small power, earthing & miscellaneous layouts

• Preparation of technical specification


Detailed design stage


• Preparation of detail layouts including sectional details wherever required

• Coordination with other services like HVAC,PHE & FF layouts

• Preparation of bill of quantities(BOQ)

• Preparation of shop drawings based on the tender drawings issued by

What You Will Learn!

  • Knowledge on Topics in Electrical Design (Building Services) Which will give you Opportunity to Crack an Interview at Entry Level and Intermediate Level
  • Fundamentals, Codes & Standards, Electrical equipment’s and its application used in the installation,
  • Means of electrical distribution for installation, Major electrical loads used in the installation.
  • Electrical design calculations-Load & maximum demand, Transformer sizing, DG sizing ,Short circuit, Voltage drop, Capacitor sizing, Cable sizing, Earthing,
  • UPS/Inverter sizing, Battery sizing
  • The importance of various Electrical Design Topics and the sequence in which you should learn the Electrical System Design
  • The training is an opportunity to apply the academics & develop an understanding of how to develop solution-driven concept & translate them into a complete plan

Who Should Attend!

  • Diploma holder or Engineer in Electrical, Mechanical, Civil and Architecture
  • Diploma and Graduates from Architecture will benefit from this course, as they will get the Knowledge to discuss with HVAC Consultants.