Lock out and tag out safety

Introduction of Lock out and tag out, steps in achieving safe lock & tag out, sequence of isolation, practical methods

Ratings: 3.50 / 5.00




Description

Chapter-1 gives an introduction of the session on lock and tag out.

In chapter-2, I have explained where exactly the lockout and tag out falls in the hierarchy of safety controls. Also I explained about the purpose of lock and tag out.


Chapter-3 describes about the definition of lock and tag out, sequence of achieving lock and tag out, some of the hazards that are prevailing in industries.


In chapter-4, the contents of an isolation tag, release of residual stored energy and typical risks due to a hazard are explained.


Chapter-5 elaborates about the energy isolation process.


Chapter-6 talks about the importance of sequence of isolation and normalisation and few sequence of isolation commonly followed in industries


Chapter-7 illustrates about some more sequence of isolation used in industries.


Chapter-8, explains about sequence of normalization, ways to confirm zero energy importance of verification of isolation, procedure for test and re- commissioning.


In Chapter-9 , the practical ways and means of achieving safety from pipelines electrical isolation and procedures for bypassing safety systems are explained


In chapter-10, some of the positive isolation devices that are used , where there is no provision of lock is there.


In chapter-11, the personnel involved in lock and tag out procedures are defined with their roles and responsibilities.


In chapter-12, steps involved in Energy isolation are mentioned. Also the chapter explains how to confirm safe isolation. Why lock out/ tag out fails is also mentioned.


In chapter-13, some of the general rules in lock out and tag out are elaborated.


Chapter-14 discusses safe removal of lockout, restoration of energy and conditions for special removal.


Chapter-15 summarises the lessons learned from all sessions and adds a conclusion.




What You Will Learn!

  • The definition and the purpose of lock out & tag out (LOTO) in any process industries
  • The steps and methods of achieving safety from the system to be worked on
  • The sequence of isolation and normalization of equipment in process industires
  • Practical means for achieving safety from the system to be worked on
  • Roles and responsibilities of the personnel involved in LOTO
  • General rules to be followed in achieving safety from the system
  • Safe removal of locks and tags after the work is completed

Who Should Attend!

  • This LOTO course can help for both beginners and also at intermediate levels as a fresher or refresher course on LOTO