Machinery Vibration Analysis

Condition Based Monitoring

Ratings: 4.67 / 5.00




Description

  • This course is prepared for persons who are looking for the first step in the field of predictive maintenance based on vibration analysis and reaching the knowledge of vibration analysis at the end of this course. You will be able to perform a proper setup for data collector, collect good vibration data from rotating machines, understand the basics of vibration signals, and analyze vibration signals such as time waveform, spectrum, and phase to detect the different mechanical and electrical faults in rotary machines.

  • Main Contents:

  1. Types of Maintenance Programs

  2. Fundamentals of Vibration

  3. Vibration Units ISO

  4. Machine Categories in Process Plant

  5. Vibration Transducers

  6. Concept of Vibration Measurement

  7. Vibration Evaluation ISO Standards

  8. Understanding Data Collection

  9. Signal Processing

  10. Signal Analysis

  11. Mechanical Fault Diagnosis such as

    Unbalance, Shaft misalignment, Bent shaft, Cocked bearings, Structural looseness, Bearings defects, Gearbox defects, Pump cavitation, Pulley defects and Belt damage.

  12. Electrical Fault Diagnosis such as

    Broken rotor bar, Rotor eccentricity, and Stator eccentricity.

  13. Real case studies from industries


  • Who Could attend?

    This course is prepared for maintenance, inspection, operation, and production Engineers. It was prepared to gradually increase the knowledge of this person from a beginner to advanced level to be a vibration analyst and diagnose different mechanical and electrical faults that are early initiated in the rotary machines.


  • Dr. Wael Salman is the Instructor for Machinery Vibration Analysis Course. His qualifications are:

    - PhD degree in Condition Monitoring of Rotating Machines – Dynamics and Vibrations, Faculty of Mechanical Engineering, Shoubra, Benha University

    - Master degree in Solid Mechanics – Dynamics and Vibrations, Faculty of Aerospace and Mechanical Engineering, Cairo University

    - Assistant Professor at Faculty of Mechanical and Aerospace Engineering, Fayoum University

    - Mobius Vibration Analysis Instructor, Australia

    - Approved Maintenance Instructor (from Egyptian Civil Aviation Authority, ECAA) at Egyptian Aviation Academy

    - Approved Maintenance Instructor (from Egyptian Armed Forces) at Air Academy

    - Mobius Instructor Approval for teaching vibration analysis courses (Cat I, Cat II, Cat III)

    - Certified Vibration Analyst – ISO Category III- Mobius Institute

What You Will Learn!

  • Understand the basics and physical nature of rotating machinery vibrations
  • Select the appropriate machinery vibration measurement technique
  • Set up instruments for the basic resolution of amplitude, frequency, and time
  • Be aware of some causes and effects of bad measurement data
  • Interpret and evaluate the test results in accordance with applicable standards
  • Understand the concepts of signal processing
  • Perform vibration analysis on rotary machine components using time waveform, frequency spectrum, and phase measurements
  • Identify different mechanical faults such as unbalance, misalignment, bent shaft, cocked bearings, structural looseness, bearings defects, gearbox defects...
  • Identify different electrical faults such as broken rotor bar, rotor eccentricity, and stator eccentricity
  • Understand the practical case studies collected from variety of industrial issues.

Who Should Attend!

  • Mechanical Engineers
  • Condition Monitoring Engineers
  • Inspection Engineers
  • Reliability Engineers
  • Predictive Maintenance Engineers
  • Operation Engineers
  • Production Engineers