اساسيات السوليدوركس

Description

الهدف من هذه الدورة هو تعليمك ، كيفية استخدام برنامج التصميم الميكانيكي Solidworks لإنشاء نماذج واللأجزاء وتجميعها وكيفية عمل رسم  لتلك الأجزاء والتجميعات. 

Lecture 1:Introduction

Lecture 2:2-Sketch tools-1

Lecture 3:3-sketch tools-2

Lecture 4:4-Sketch-tools-3

Lecture 5:5-Extrude base-1

Lecture 6:6-Extrude base-2

Lecture 7:7-Extrude base-3

Lecture 8:8-Extrude cut

Lecture 9:9-Revolve base

Lecture 10:10- Revolve Cut

Lecture 11:11-Fillets&chamfer

Lecture 12:12- Chamfer

Lecture 13:13- Working with planes

Lecture 14:14-Making an axis, Points& coordinate system

Lecture 15:15- Shell

Lecture 16:16- Pattern linear& circular in sketch& feature

Lecture 17:17-Pattern curve & sketch Driven pattern

Lecture 18:18-Pattern table&fill

Lecture 19:19-Variable Pattern

Lecture 20:20-All patterns

Lecture 21:21-rib

Lecture 22:22.spline tools

Lecture 23:23.Reverse Engineering

Lecture 24:25.spline on surface

Lecture 25:25.sweep-options

Lecture 26:26-sweep without profile

Lecture 27:27-sweep curve guide

Lecture 28:28- Part Modeling (Sweep cut with body)

Lecture 29:28- Part Modeling (Sweep cut)

Lecture 30:29-Part Modeling ( Spring methods)

Lecture 31:30-Part Modeling (Loft)

Lecture 32:32-Part Modeling (Loft options)

Lecture 33:33-Part Modeling (Loft with guid curve)

Lecture 34:34-Part Modeling (Loft application)

Lecture 35:35-Part Modeling (Loft cut)

Lecture 36:36-Boundary vs Loft

Lecture 36-2-Molding Exercises

Lecture 37-1-Assembly

Lecture 37-2-Draft Drawing

Lecture 37-3:37-Assembly (1) Intro

Lecture 38:38-Degree of freedom and Add mates

Lecture 39:39-Assembly (3)Standard Mates;Concident,distance, Concentric, Tangent.

Lecture 40:Assembly (4)Multiple Mate

Lecture 41:Assembly (5)Interference Detection and Assembly appearance

Lecture 42:42-Assembly (6)Dynamic clearance and Collision detection

Lecture 43:43-Assembly (7)Exploded View

Lecture 44:44-Assembly (8)Top Down Design

Lecture 45:45-Assembly (9)BOM in Assembly

Lecture 46:46-Assembly (10)Subassembly

Lecture 47:47-Assembly (11)Assembly Features Scope, Fillets & Chamfer

Lecture 48:48-Assembly (12)Weld Beads

Lecture 49:49 -Assembly (13)Hole Series

Lecture 50:50 -Assembly (14)Smart Components

Lecture 51:51 -Assembly (15)Insert Belt in Assembly

Lecture 52:52-Assembly (16) Linear Pattern Components

Lecture 53:53-Assembly (17)Circular Pattern Components

Lecture 54:54-Assembly (18)Driven Pattern Components

Lecture 55:55 -Assembly (19) Mirror Pattern Components

Lecture 56:56 -Assembly (20) Advanced Mate (Symmetric& Width)

Lecture 57:57 -Assembly (21) Advanced Mate (Linear Coupler Mate & Path Mate).

Lecture 58:58 -Assembly (22) Mechanical Mate (Cam Mate& Gear Mate).

Lecture 59:59 -Assembly (23)Mechanical Mate (Rack & Pinion Mate& Screw Mate)

Lecture 60:60 -Assembly (24) Advanced Mate (Distance& angle mate)

Lecture 61:61 -Assembly (25)Advanced Mate (Hinge & References mate).

Lecture 62:62 -Assembly (26)Configuration Table Design Assembly

Lecture 63:63-Assembly (27)Assembly Case Study (1)

Projects :64-Assembly (28)Assembly Case Study (2)

Projects :65-Project-1

Projects :65-Project-2

What You Will Learn!

• تطبيقات عامة وشرح اساسيات السوليدوركس

Who Should Attend!

• المهندس والمصمم والفنى

TAKE THIS COURSE